The NYC TR2 form, officially termed as the Technical Report Concrete Sampling and Testing, serves a critical role within construction projects across New York City. It is a document that must be completed typewritten and entails comprehensive information regarding the sampling and testing of concrete. This form ensures that all concrete used in construction projects meets the city’s stringent requirements, highlighting details like location information, the licensed concrete testing laboratory's responsibilities, and various certifications by involved parties.
The New York City TR2 form plays a critical role in ensuring the integrity and safety of concrete work in construction projects within the city. A technical report on concrete sampling and testing, it requires meticulous completion by authorized personnel at various stages of construction. The form itself is a comprehensive document that requires information regarding the location of the project, including house number, street name, and borough, ensuring that concrete work aligns with specific requirements for each locale. Licensed Concrete Testing Lab Information section mandates details about the laboratory responsible for testing, encapsulating the director's details and the lab's credentials. This form also outlines the responsibilities of the licensed concrete testing laboratory, emphasizing the commitment to comply with Building Code sections 1905.6 and 1704.1, alongside additional regulations governing concrete testing labs. Further, it includes declarations from the design applicant and the building owner, reinforcing the accountability chain. The latter sections demand test reports and a certification of completion from the laboratory, alongside statements from the design applicant and the concrete producer, ensuring a full spectrum of accountability from construction to completion. This form serves as a linchpin in upholding construction standards, requiring authentication at every step to prevent falsification, with penalties for non-compliance clearly stated, thereby maintaining the safety and reliability of concrete work in the city.
TR2: Technical Report
Concrete Sampling and Testing
Orient and affix BIS
job number label here
Must be typewritten.
Sheet number 1
1Location Information Required for ALL applications.
House No(s)
Street Name
Borough
Block
Lot
BIN
CB No.
Work on Floor(s)
Apt/Condo No(s)
2
Licensed Concrete Testing Lab Information Required for ALL applications.
Director Last Name
Director First Name
Director Middle Initial
Business Name
Business Telephone
Business Address
Business Fax
City
State
Zip
Mobile Telephone
E-Mail
Director’s Lic. Number
P.E.
R.A.
Concrete Testing Lab Lic. Number
3
Licensed Concrete Testing Laboratory’s Identification of Responsibilities Required prior to Permit.
Check all that apply below:
I certify that I am the director of the licensed concrete testing laboratory accepting responsibility for conducting the testing in accordance with BC 1905.6 and BC 1704.1. I further certify that I have read the applicable sections of the New York City Construction Codes in connection with the testing of concrete and licensed concrete testing laboratories as well as 1 RCNY §5-02 and 1 RCNY §101-07(c)(6), which specifies the qualifications and duties required of a licensed concrete testing laboratory and that this licensed testing laboratory meets those qualifications for the work for which I take responsibility. I agree that both I and the licensed concrete testing laboratory will comply with all provisions of the New York City Construction Codes as well as 1 RCNY §5-02 and 1 RCNY §101-07(c)(6). I am aware of the additional sanctions imposed on false filings by §28-211.1.2 of the Administrative Code.
Change of Applicant: I am a newly designated individual responsible for the testing specified herein and I hereby state that: None of the tests indicated herein have been performed to date by the previously designated individual.
Some of the tests indicated herein have been performed by the previously designated individual, as indicated in the attached report.
I am aware of the additional sanctions imposed on false filings by §28-211.1.2 of the Administrative Code.
Name (please print)
Signature
Date
P.E. / R.A. Seal (apply seal, then sign and date over seal)
10/09
TR2
Sheet number 2
4
Design Applicant’s Statement and Signature P.E./R.A. Required prior to Permit.
I certify that the licensed concrete testing laboratory specified in section 2 above and engaged by the owner to perform tests on the work at the location specified in section 1 above is acceptable. (BC 1704.1)
5Building Owner’s Statement and Signature Required prior to Permit.
I certify that I have employed the licensed concrete testing laboratory specified in section 2 above in accordance with BC 1704.1. Falsification of any statement is a misdemeanor and is punishable by a fine or imprisonment, or both. It is unlawful to give to a city employee, or for a city employee to accept, any benefit, monetary or otherwise, either as a gratuity for properly performing the job or in exchange for special consideration. Violation is punishable by a fine or imprisonment, or both. I understand that if I am found after hearing to have knowingly or negligently made a false statement or to have knowingly or negligently falsified or allowed to be falsified any certificate, form, signed statement, application, report or certification of the correction of a violation required under the provisions of this code or of a rule of any agency, I may be barred from filing further applications or documents with the Department.
Name (print)
Title
STOP HERE PRIOR TO PERMIT
Sheet number
of
sheets
6Test Report Required prior to Sign-off. Use supplemental pages as needed. Attach Original Lab Test Reports
Specified Concrete Str. (f’c):
PSI
Specified Test Age (days):
Field Testing Results:
Test Report
Date of
Cylinder I.D.
Slump
Air Content
Temperature
Weight
Placement
Total
Breaking
Number
Location
Strength
in
%
°F
lbs/ft3
yd3
Licensed Concrete Lab Director Name (please print)
Sheet number of sheets
7 Licensed Concrete Testing Laboratory’s Certification of Completion Required prior to Sign-off.
I certify that I have completed the testing specified herein and that the results reported in section 6 of this form are true and accurate in accordance with §28-406.3.2.
Withdrawal of Applicant: I am withdrawing responsibility for conducting the tests indicated herein and herewith submit the results or status of the work performed to date.
8 Design Applicant’s Statements and Signatures Required prior to Sign-off. P.E./R.A. responsible for plans, choose one and sign/seal.
I certify I have reviewed the test results reported by the licensed concrete testing lab in section 6 above and found them to be in compli- ance with the approved construction documents.
I certify I have reviewed the test results reported by the licensed concrete testing lab in section 6 above and found them to be in compli- ance with the approved construction documents except as noted in the attached report (BC 1905.6.3.3)
Note: design applicant’s signed and sealed report must be attached to this document
9Concrete Producer’s Statement and Signature Required prior to Sign-off. Must be filled out by Owner of Production Facility.
I certify that the test results reported in section 6 above were reported to me, and I further certify that the concrete delivered is in accordance with the design mix(es) specified on the TR3 submitted for the work specified in section 1 above.
NRMCA Expiration Date (BC 1905.8.2)
Business Fax:
Filling out the NYC TR2 form is a necessary step in ensuring that concrete sampling and testing meet the required standards for construction projects in New York City. This form plays a crucial role in documenting the details of the testing process, the parties involved, and the results obtained, thus ensuring the integrity and safety of the construction work. Here are the simplified steps to complete the TR2 form:
Once all sections of the TR2 form have been accurately completed and reviewed, the form can be submitted to the appropriate New York City Department. Make sure to keep a copy for your records to track the progress and compliance of the concrete testing and sampling for your project.
What is the NYC TR2 form?
The NYC TR2 form, also known as the Technical Report Concrete Sampling and Testing form, is a document used in New York City's construction industry. It is required for various applications to ensure that concrete used in construction projects complies with specific codes and regulations mandated by the city. The form documents details regarding the location of the construction project, information about the licensed concrete testing laboratory, the responsibilities of the laboratory, and statements from various stakeholders such as the building owner and design applicant. Additionally, it includes test reports and a certification of completion from the licensed concrete testing laboratory.
Who needs to fill out the TR2 form?
The TR2 form must be filled out by several parties involved in a construction project where concrete testing is required. This includes:
What information is required on the TR2 form?
The form requires comprehensive information across several sections, including:
Why is the TR2 form important?
The TR2 form plays a crucial role in the construction industry in New York City by ensuring that all concrete used in construction projects meets the required strength and quality standards. It helps in maintaining safety and durability of structures by mandating thorough testing and verification of concrete materials. By documenting and verifying the integrity of concrete testing, the form also aids in the prevention of construction fraud and enhances accountability among construction professionals.
How is the TR2 form submitted?
The TR2 form must be typewritten and submitted as part of the permit application process for projects requiring concrete testing. Once filled, it is submitted to the New York City Department of Buildings (DOB) along with other required documents for the project. Professionals involved must ensure that the form is fully completed and that all declarations and certifications are accurately provided to avoid delays or penalties in the approval process.
What happens if incorrect information is supplied on the TR2 form?
Supplying incorrect information on the TR2 form is taken very seriously. It is considered a misdemeanor punishable by fines, imprisonment, or both. If a stakeholder is found to have knowingly or negligently made a false statement or falsified any part of the form, additional sanctions may apply. Such actions can also lead to a ban from filing further applications or documents with the Department of Buildings, highlighting the importance of accuracy and honesty in completing the form.
Filling out the NYC TR2 form, which is essential for concrete sampling and testing, can sometimes be confusing. This document is crucial in ensuring that construction projects meet the New York City Construction Codes. However, there are common mistakes people often make when completing this form. Addressing these errors not only simplifies the approval process but also helps avoid potential legal complications.
One frequent mistake is not providing complete information in the Location Information section. Every field, including House No(s), Street Name, Borough, and so on, must be filled out comprehensively. This section is critical because it identifies the exact location of the project, and any omission may lead to delays or confusion regarding the project’s scope and location.
Ensuring the accuracy and completeness of the NYC TR2 form is paramount for project approval and compliance. It serves as a testament to the quality and safety of the construction project. Professionals should approach this document with care, double-checking each section before submission to avoid these common mistakes.
When undertaking construction projects in New York City, particularly those requiring concrete work, the TR2: Technical Report for Concrete Sampling and Testing is a vital document. However, this form rarely stands alone. A range of other forms and documents are often essential to ensure compliance with New York City Building Code and other regulations, thereby facilitating smooth project progression. Below are key documents typically used alongside the TR2 form.
The synergy among these documents ensures a holistic approach to project management, regulatory compliance, and safety. The robust framework provided by New York City's regulatory environment, encompassed in these essential documents, guarantees that structures are not only built to last but are safe for all occupants. For anyone involved in the construction industry in NYC, familiarity with these forms is as fundamental as the materials that hold the city's buildings together.
The TR1 Technical Report: Statement of Responsibility mirrors the TR2 form in the sense that both are integral to the review and approval process of building-based projects within New York City. The TR1 form is filled out by professionals who take responsibility for certain inspections and tests related to building safety, like structural stability and mechanical integrity. Similarly, the TR2 form is utilized by concrete testing laboratories certifying that concrete sampling and testing meet the city's building code requirements. Both forms serve to ensure that the work performed on construction projects adheres to the established codes and regulations, aiming to uphold safety and reliability.
Building Permit Application forms share commonalities with the TR2 form, as both types of documents are foundational in the construction approval process within municipal regulations. The building permit application is the initial step in seeking authorization for new construction, alterations, and demolitions. It contains details about the project location, description of work, owner information, and identification of responsible professionals. The TR2 supplements this by providing concrete-specific testing information, ensuring that the material aspects of the project also comply with safety standards. Together, they facilitate a comprehensive review process by city officials.
The TR3: Concrete Mix Design form is closely related to the TR2 form, both focusing on the specifics of concrete used in construction projects. The TR3 is used for submitting and obtaining approval for concrete mix designs, detailing the proportions and components of the mix to ensure it meets strength and durability requirements. The TR2, on its part, covers the actual sampling and testing of concrete as implemented in the project, verifying that the applied mix complies with the previously approved specifications. The synergy between TR2 and TR3 forms guarantees that both the proposed and the executed aspects of concrete usage are up to code.
Statement of Special Inspections is another document that parallels the TR2 form in its function within the construction oversight framework. This document outlines the plan for special inspections as required by the building code, specifying inspections and tests that are necessary due to unusual structural complexity or materials used. It aligns with the TR2 in ensuring that specific elements of construction are meticulously examined beyond the standard approval processes, for the purpose of maintaining high safety standards. The inspection report typically follows the completion of these inspections, echoing the verification process of the TR2.
Finally, the After-Hours Work Permit application has similarity with the TR2 form as both facilitate regulatory compliance for construction projects. While the TR2 ensures that concrete work meets the technical specifications and safety standards, the After-Hours Work Permit application allows for construction activities outside of standard business hours, subject to city regulations. This permit is crucial for projects requiring extended work times to meet deadlines without compromising public safety or community standards. Both documents reflect the layered approach of the regulatory framework in managing construction practices effectively.
Filling out the NYC TR2 Form, which is crucial for concrete sampling and testing, can seem daunting. But, with a clear guide on what to do and what to avoid, you can navigate this process with confidence. Here are key dos and don'ts:
By following these guidelines, you can ensure a smoother, more efficient process when submitting your NYC TR2 form. Remember, accuracy, and completeness are key to avoiding delays or legal issues.
When dealing with the NYC TR2 form, which is integral for concrete sampling and testing in construction projects, there are commonplace misunderstands that can affect compliance and project progression. Addressing these misconceptions head-on can streamline the submission process and uphold project integrity.
Anyone can fill out the TR2 form: This is incorrect. Only a director of a licensed concrete testing laboratory can fill out parts of this form, certifying the laboratory's responsibility for conducting the concrete testing in compliance with specific building codes and regulations.
TR2 is only required at project completion: In practice, the TR2 form is part of a series of documents required at different stages before and after permit issuance, not merely at the project's end. Its sections must be filled out and submitted as specified for permit, before concrete is poured, and prior to sign-off.
Digital submissions are not allowed: This is a common misconception. Given the typewritten requirement, it's logical to conclude that these forms must be submitted in paper form. However, digitized, typewritten forms are often acceptable, though one should always verify current submission guidelines with the NYC Department of Buildings.
The TR2 form is a standalone document: Actually, the TR2 needs to be submitted alongside other documentation, including potentially a TR3 form for concrete mix design and possibly additional lab test reports, to fully comply with the New York City Construction Codes.
There is no penalty for incorrect information: On the contrary, the form clearly states that falsification of any statement can result in misdemeanor charges, punishable by fines or imprisonment. Accurate and truthful reporting is mandatory.
Field testing results can be submitted later: Incorrect. The TR2 form requires that field testing results be attached at the time of submission. Delaying these submissions can result in project delays or permit issues.
All sections are always required: Not true. While most of the form is required for all applications, specific sections and certifications vary based on the project's status and the work completed to date.
The form must only be submitted by mail: While mailing might be one submission method, electronic submission processes have become increasingly prevalent, especially for maintaining workflow efficiencies during project oversight. Again, verification with current protocols is advisable.
Any licensed testing lab can perform the tests: This is misleading. Only labs licensed and meeting the qualifications outlined by specific New York City codes and regulations can conduct these tests and sign off on the TR2 form.
Signatures can be photocopied: For a form as critical as the TR2, original signatures, especially over seals, are typically required to ensure authenticity and accountability. Photocopied signatures might not be accepted and could delay project advancements.
Understanding these nuances with the TR2 form can significantly enhance project management efforts, ensuring that documentation is correctly completed and submitted, thereby avoiding unnecessary delays or legal complications.
Filling out and utilizing the NYC TR2 form correctly is essential for ensuring compliance with the standards and regulations governing concrete sampling and testing in New York City. Here are eight key takeaways to remember:
Properly filling out the NYC TR2 form is a critical process that ensures the integrity of concrete used in construction, complying with regulatory requirements, and safeguarding the safety and reliability of structures in New York City.
Prevailing Wage Reporting - Signatories assert that all employees have been paid their full weekly wages without unauthorized deductions.
New York City Department of Buildings - The option to plant trees at an alternate location allows for flexibility in meeting the city's street tree requirements, accommodating various project constraints.